Combination chilled drinking fountain with electronic sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Drinking fountain is mechanically activated. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. 
Basin is designed to reduce splashing and standing water. The recessed, electronic bottle filler contains FRESHSHIELD, which utilizes a silver based antimicrobial compound to reduce the growth of micro-organisims and mildew and helps protect the surface from discoloration, odours and degradation.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. 
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller. Stainless steel cabinet. Sensor activated sports bottle filler with bottle counter. Optional filter kit F036930-002.

Item number

Product name KEM8WR-EBF-STN

Product properties

material code 1.4301 Chrome Nickel steel V2A
overall depth (front-back) 19''
overall height 45 3/4''
overall width (left-right) 19 3/4''
type of mounting WALL-MOUNTING
Cooling capacity 30.00 liter per hour
Type of operation Sensor operation
full load amps 4.40 ampere
material thickness 1/16''
surface finish Brushed stainless steel
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
outlet size DN 32
Bottle filler Yes


Additional product information