Recessed sports bottle filler chilled drinking fountain combination. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Universal installation, sports bottle filler can be installed either left or right. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Drinking fountain has a vandal resistant push button and a low flow bubbler with flexible guard. Unit will comply with wheelchair accessibility when properly installed. Moulded components utilize a silver-based antimicrobial compound that reduces the growth of micro-organisims and mildew to protect surfaces from discolouration, odours, and degradation. Included tailpiece is sized to accept either 1 1/2 inch (38 mm) or 1 1/4 inch (32 mm) P-trap (not included).
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <(><<)>=0.25%) and is in compliance with California's Health <(>&<)> Safety Code Section 116875 (commonly known as AB1953).
Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, manually activated sports bottle filler. Optional filter kit F036930-002.
18 1/4 x 39 1/2 x 40 3/4" Overall (FB x LR x H).
463 x 1003 x 1035 mm Overall (FB x LR x H).