Recessed sports bottle filler chilled drinking fountain combination. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Universal installation, sports bottle filler can be installed either left or right. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Drinking fountain has a vandal resistant push button and a low flow bubbler with flexible guard. Unit will comply with wheelchair accessibility when properly installed. Sports bottle filler has a 0.5gpm (1.9 lpm) flow rate.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, sensor activated sports bottle filler with bottle counter. Optional filter kit: F036930-002.

Item number

Product name KEM8-EBF-STN

Product properties

gross weight 73.18 kg
net weight 0.00 kg
overall depth (front-back) 18 1/4''
overall height 40 3/4''
overall width (left-right) 39 1/2''
type of mounting in-wall installation with box
Cooling capacity 30.00 liter per hour
Type of operation Sensor operation
full load amps 4.80 ampere
surface finish Brushed stainless steel
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
motor power 550.00 watt
waste size DN 32
inlet size DN 10
drinking bubbler yes
Bottle filler Yes
Wheelchair compliant Yes


Additional product information