KEPV8ACSL-EBF-STN Universal chilled vandal-resistant combination, electronic

Combination chilled split level drinking fountain with sports bottle filler. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Sports bottle filler cabinet finish is brushed stainless steel. Waterways are lead-free in materials and construction. Drinking fountains are mechanically activated. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Moulded components utilize a silver-based antimicrobial compound that reduces the growth of micro-organisims and mildew to protect surfaces from discolouration, odours, and degradation. Unit will comply with wheelchair accessibility when properly installed.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). Easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, stainless steel cabinet, vandal resistant push buttons, sensor activated sports bottle filler with bottle counter. Optional consumable: Galaxi Filtration Kit for KEP universal series. Optional Galaxi Filter Cartridge: F037116-001..

18 9/16 x 35 1/4 x 37 13/16" Overall (FB x LR x H).
472 x 896 x 960 mm Overall (FB x LR x H).

Item number

Product name KEPV8ACSL-EBF-STN

Product properties

Overall depth 18 9/16 "
Overall height 37 13/16 "
Overall width 35 1/4 "
Type of mounting Wall mounting
Cooling capacity 30.00000 liter per hour
Type of operation Sensor operation
Surface finish Satin finished
Input supply voltage Hz 60.00000 hertz
Input supply voltage V 115.00000 volt
Motor power 500.00000 watt
Waste size DN 32
Inlet size DN-10-3-8INH
Drinking bubbler Yes

Additional product information


Optional Parts

Related products

KEP8AC-EBF-SND Universal chilled combination, electronic
KEP8AC-EBF-SND Universal chilled combination, electronic   Single Combination - Chilled

KEP8AC-EBF-SND Universal chilled combination, electronic

Overall width:
18 7/16 " 
Overall height:
37 13/16 " 
Overall depth:
18 9/16 " 
KEPVAC-SBF-STN Universal unchilled combination, manual
KEPVAC-SBF-STN Universal unchilled combination, manual   Single Combination - Unchilled

KEPVAC-SBF-STN Universal unchilled combination, manual

Overall width:
17 5/8 " 
Overall height:
37 13/16 " 
Overall depth:
18 9/16 "