Classic Drinking Fountains

Free standing chilled drinking fountain. Waterways are lead-free in materials & construction. Stainless steel top with heavy gauge steel frame. High-efficiency cooling tank and coil. Dial-a-drink bubbler.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
10 gph chiller, sandstone finish.

Optional Glass Filler: Please call Customer Service for a quote and order number.


Item number

Product name KEP10CP-SND

Product properties

gross weight 33.11 kg
material Steel
net weight 0.00 kg
Overall front to back 12 5/8''
overall height 44''
Overall left to right 12 1/8''
type of mounting FLOOR-MOUNTING
Cooling capacity 38.00 liter per hour
Type of operation Manual operation
full load amps 4.40 ampere
material thickness 1/16''
Cabinet finish Sandstone
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 500.00 watt
outlet size DN 32
inlet diameter DN 10
Bottle filler No

Spare parts

Additional product information


Product Pictures
ZPO_001_2000102950-KEP3CP-SND_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102950-KEP10CP-SND_#SALL_high.png PNG (301 KB)
Mounting Instruction
ZMI_001_2000102910-KEP8M-SND_#SEN-CA_#AQU_#V1.pdf PDF (627 KB)
ZMI_001_2000102946-KEP3CP-SND_#SEN-CA_#AQU_#V1.pdf PDF (566 KB)

Related products