Galvanized steel cabinet. Chiller is air cooled and is designed for remote installation. Stainless steel storage tank. May be used to supply up to two drinking fountains. 1/4" OD stainless steel water tube connections.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
5 gph commercial grade chiller.

Item number

Product name KER5

Product properties

gross weight 23.13 kg
material Steel
net weight 0.00 kg
Overall front to back 16 5/8''
overall height 16 1/4''
Overall left to right 8 1/4''
Cooling capacity 19.00 liter per hour
full load amps 3.60 ampere
water temperature 10.00 degree celcius
compressor power 0.20 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 450.00 watt
outlet size DN 8
inlet diameter DN 8
Bottle filler No

Additional product information

Product Pictures
ZPO_001_2000102958-KER5_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102958-KER5_#SALL_high.png PNG (301 KB)
Mounting Instruction
ZMI_001_2000102958-KER5_#SEN-CA_#AQU_#V1.pdf PDF (626 KB)