Chillers

Galvanized steel cabinet. Chiller is air cooled and is designed for remote installation. Stainless steel storage tank. May be used to supply up to two drinking fountains. 1/4" OD stainless steel water tube connections.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
12 gph commercial grade chiller.

Item number

Product name KER12

Product properties

gross weight 28.12 kg
material Steel
net weight 0.00 kg
Overall front to back 16 5/8''
overall height 16 1/4''
Overall left to right 8 1/4''
Cooling capacity 45.60 liter per hour
full load amps 5.40 ampere
water temperature 10.00 degree celcius
compressor power 0.33 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 620.00 watt
outlet size DN 8
inlet diameter DN 8
Bottle filler No

Additional product information


Product Pictures
ZPO_001_2000102960-KER8_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102960-KER12_#SALL_high.png PNG (301 KB)
Mounting Instruction
ZMI_001_2000102959-KER8_#SEN-CA_#AQU_#V1.pdf PDF (557 KB)