Urinals

This Heavy Duty Urinal is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm) type 304 (CNS 18/10) stainless steel. The fixture is seamlessly welded and polished to a #4 satin finish. The urinal has an integral flushing rim for sanitary wash down. Includes integral beehive strainer and 1 1/2" (38.1mm) removable P-Trap (concealed within shroud).
The fixture is tested and certified to ASME A112.19.2-2008/CSA B45.1-08 as a Low Consumption Urinal using 1.0 gpf / 3.8 lpf or less.
INSTALLATION:
These fixtures are designed to be installed onto finished walls which are serviceable from a pipe chase. Installation is achieved by threading 4 x 1/2" (13 mm) diameter threaded anchor rods to the back of the fixture. The anchor rods are then secured on the chase side of the wall by means of the supplied nuts and washers. Standard included hardware is for walls up to 8" (203.2 mm) thick. For existing walls, an optional metal cutout template is available. For new block (CMU) or poured concrete walls, an optional wall sleeve is available. rear mounted

Item number

SAP# 2000101935
Product name HDU1314-RM

Product properties

gross weight 0.00 kg
material Stainless steel
net weight 0.00 kg
Overall front to back 12 1/2''
overall height 27''
Overall left to right 14''
type of mounting bolt fix with duct wall
type of waste kit domed waste
outlet size DN 40
inlet size G 3/4 B
minimum flushing capacity 3.80 liter
type of flushing water
type of urinal single urinal
water inlet concealed

Additional product information


Related Products