This Heavy Duty Combination Toilet/Lavatory is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm) type 304 (CNS 18/10) stainless steel and is designed to withstand loads of 5000lbs (2267kg) without permanent damage. The cabinet and drawn bowls are seamlessly welded and are polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is also 14 gauge (2.0 mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI (3.41 BAR) flow pressure. The toilet was tested and certified as a low water consumption toilet using 1.6gpf (6 litres). The trap will pass a 2 1/8" (54 mm) ball and has a seal of 3.5" (88.9 mm) min. The waste outlet extends a minimum of 3" (76.2 mm) behind the fixture and has a plain end OD of 2 3/8" (60.3 mm). Certified to ASME A112.19.2-2008/CSA B45.1-08 standards.
These fixtures are designed to be installed onto finished walls which are serviceable from a pipe chase. Standard included hardware is for walls up to 8" (203.2 mm) thick. For existing walls, an optional metal cutout template is available. For new block (CMU) or poured concrete walls, an optional wall sleeve is available.
Recommended with I-CON electronic (AC or battery powered) basin and flush valves for water savings, enhanced security and performance and reduced maintenance costs. Call Commercial Customer Service for full details. Air operated valves are also available.
- I-CON-COMBI - Electronic basin and flush valve kit (recommended)
- SV - Single temperature basin valve
- DV - Dual temperature basin valve
- SV-MV2 - Single temperature manifold valve (for 2 fixture control)
- DV-MV2 - Dual temperature manifold valve (for 2 fixture control)
- FVC - Combi Unit Flush Valve