Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible: meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location. Includes 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.
Model Options: ALHS4606P-1/2L, 1 faucet hole, plus bubbler hole left ledge ALHS4606P-1/2R, 1 faucet hole, plus bubbler hole right ledge ALHS4606P-1/2DL, Diagonal punching, 1 faucet hole right ledge plus bubbler hole left ledge ALHS4606P-1/2DR, Diagonal punching, 1 faucet hole left ledge plus bubbler hole right ledge ALHS4606P-1/4L, 3 faucet holes 8" centerset, plus bubbler hole on opposing left ledge ALHS4606P-1/4R, 3 faucet holes 8" centerset, plus bubbler hole on opposing right ledge