F3E-Therm Electronic thermostatic in-wall mixer with battery operation

F3E-Therm thermostatic mixer DN 15 as finished installation kit for in-wall installation in basic installation kit, for sanitary facilities. Opto-electronically controlled, for connection to hot water and cold water. Connection block with integrated solenoid valve cartridge, hidden thermostat and hoses with integrated backflow preventer and strainers. Stainless steel cover plate 190 x 245 mm with covered screw fixing including sensor with control electronics. With 6 V lithium battery (CR-P2), holding frame with profile seal and spout with laminar jet controller with integrated flow regulator 6.0 l/min. Projection 260 mm, depth adjustability 25 mm. Visible parts made of high-polished chromium-plated brass. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control.

Item number

SAP# 2030040194
Product name F3ET1006

Product properties

Type of mounting In-wall installation with box
Type of operation Sensor operation
Power supply connection Battery 6-V
Diameter nominal DN 15
Calculation flow rate cold water 0.07 liter per second
Calculation flow rate hot water 0.07 liter per second
Functional principle Electronic self-closing
Minimum flow pressure 1.00 bar
Volume flow rate at 3 bar 0.10 liter per second
Inlet size G-3-4-B
Type of mixing Concealed thermostat
Material casing Stainless steel
Material fitting Brass
Sound insulation No
Spout projection 260.00 mm
Surface finish casing Satin finished
Surface finish fitting Chromed
Type of tap In-wall tap
Depressurised No
Thermal disinfection No
Protective shutdown Yes
Default automatic hygiene flushing 24h after the last activity
Type of sensor Opto-electronic sensor

Additional product information


Mandatory accessories

R3 Franke system box for in-wall mixers
R3 Franke system box for in-wall mixers

R3 Franke system box for in-wall mixers

Type:
Built-in-box 
Type of mounting:
In-wall installation with box 
R5 Franke system box for in-wall mixers
R5 Franke system box for in-wall mixers F5BX1001 ++

R5 Franke system box for in-wall mixers

Type:
Built in box flange 
Type of mounting:
In-wall installation with box 
Show all related products

Optional accessories

Spare Parts

Related Products

F3E-Mix electronic pillar mixer with in-wall power supply
F3E-Mix electronic pillar mixer with in-wall power supply F3EM1003 ++

F3E-Mix electronic pillar mixer with in-wall power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
EXOS. Electronic pillar mixer with plug-in power supply unit
EXOS. Electronic pillar mixer with plug-in power supply unit EXOS130

EXOS. Electronic pillar mixer with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E Electronic bib tap with battery operation
F3E Electronic bib tap with battery operation F3EV1004 ++

F3E Electronic bib tap with battery operation

Type of operation:
Sensor operation 
Type of mounting:
Wall mounting 
Type of sensor:
Opto-electronic sensor 
F5E electronic pillar tap with battery operation
F5E electronic pillar tap with battery operation F5EV1001 ++

F5E electronic pillar tap with battery operation

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer with battery compartment
F3E-Mix electronic pillar mixer with battery compartment F3EM1001 ++

F3E-Mix electronic pillar mixer with battery compartment

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E electronic pillar tap with plug-in power supply unit
F3E electronic pillar tap with plug-in power supply unit F3EV1002 ++

F3E electronic pillar tap with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E electronic pillar tap with battery compartment
F3E electronic pillar tap with battery compartment F3EV1001 ++

F3E electronic pillar tap with battery compartment

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F5E-Therm electronic thermostatic wall-mounted mixer for separate power supply
F5E-Therm electronic thermostatic wall-mounted mixer for separate power supply F5ET1005++

F5E-Therm electronic thermostatic wall-mounted mixer for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
Wall mounting 
Type of sensor:
Opto-electronic sensor 
F3E-Therm electronic thermostatic wall-mounted mixer
F3E-Therm electronic thermostatic wall-mounted mixer F3ET1002 ++

F3E-Therm electronic thermostatic wall-mounted mixer

Type of operation:
Sensor operation 
Type of mounting:
Wall mounting 
Type of sensor:
Opto-electronic sensor 
F5E-Mix electronic pillar mixer with plug-in power supply unit for hot water heaters
F5E-Mix electronic pillar mixer with plug-in power supply unit for hot water heaters F5EM1006 ++

F5E-Mix electronic pillar mixer with plug-in power supply unit for hot water heaters

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer with battery compartment
F3E-Mix electronic pillar mixer with battery compartment F3EM1001 ++

F3E-Mix electronic pillar mixer with battery compartment

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E Electronic in-wall tap with battery operation
F3E Electronic in-wall tap with battery operation F3EV1011 ++

F3E Electronic in-wall tap with battery operation

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor