Wash basins

ANMW198

GAMBA children's washbasin made from MIRANIT resin-bonded mineral material with non-porous smooth surfaces (max. temperature 80°C). The moulded form is round with an asymmetric tap landing with storage space including tap hole and rear upstand. Without overflow....

ANMW199

LUNA children's washbasin made from MIRANIT resin-bonded mineral material with non-porous smooth surface (max. temperature 80°C). The moulded form is round with a tangential cut and a slightly swept tap landing with storage space including tap hole and small rea...

ANMW210 ++

RONDA single washbasin made of MIRANIT resin-bonded mineral material with smooth, pore-free surface (temperature-resistant up to 80°C). With seamless round bowl, flattened out at the rear, without overflow. Integral back panel with integrated brackets and holes ...

ANMW410 ++

QUADRO single washbasin made of MIRANIT resin-bonded mineral material, with smooth, pore-free surface (temperature-resistant up to 80°C). With seamless, rectangular bowl without overflow. Integral back panel with integrated brackets and holes for fixing. Rear co...

ANMW510 ++

QUADRO niche washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). For installation in a recess between two walls, with lateral cuts of 90°. With one centrally positioned, seamless rectangular bowl, wit...

ANMW550 ++

RONDA niche washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). For installation in a recess between two walls, with lateral cuts of 90°. With one centrally positioned, seamless round bowl, without ov...

ANMX205

The Centinel washbasin is manufactured from 1.2mm thick grade En 1.4301 (304) stainless steel polished to a satin finish. The bowl is prepared with no tap hole and supplied with a 32mm flush grated waste only (no overflow can be fitted). Complete with bottom acc...

ANMX206

Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rearright hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking ...

ANMX212

Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rear right hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking...

ANMX216

Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rear right hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking...

ANMX450

Wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded bowl with dimension 360x272x135 mm, made of one piece, for high risk vandalism areas due to seamless closed trap cover and semicircular shape, round...

BR300OU++

Round inset basin, can be mounted from top or underneath, stainless steel, surface high polished, material thickness 1 mm, bowl diameter 300 mm, without overflow, incl. 5/4" flat perforated waste, stainless steel lugs for underneath mounting are included.

BRC390SF

Single wash basin for wall mounting, stainless steel, surface on both sides satin finished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high ...

BRP260E

Single wash basin for wall mounting in 90° corners, stainless steel, surface high polished, material thickness 1.25 mm, seamless welded bowl with 260 mm diameter, rounded edges, without overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 192 mm hi...

BRP390

Single wash basin for wall mounting, stainless steel, surface on both sides high polished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high p...

BS204 ++

Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 500x335x155 mm, oval shape, 90 mm tap ledge, prewelded mounting brackets, with soap dish, incl. screws and dowels.

D20140N

This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 32mm waste outlet. Waste fitt...

D20142N

This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 32mm waste outlet. Waste fitt...

D20144N

This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 32mm waste outlet. Waste fitt...

D20161N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...

D20162N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....

D20163N

Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...

D20167N

Washbasin for insetting into worktop, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 0.9mm. Prepared for 32mm waste outlet and overflow hole with two tapholes in the rear ledge behind the bowl - suitable for eiher ...

D20168N

Washbasin for insetting into worktop, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 0.9mm. Prepared for 32mm waste outlet and overflow hole with two tapholes in the rear ledge behind the bowl - suitable for eiher ...

D20170N

Washbasin for insetting into worktops, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 1.2mm. Prepared for 32mm waste outlet and verflow hole with two tapholes in the rear ledge behind the bowl - suitable for basin ...

D20171N

Washbasin for insetting into worktops, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 1.2mm. Prepared for 32mm waste outlet and verflow hole with two tapholes in the rear ledge behind the bowl - suitable for basin ...

D20184N

Handwashpac top is manufactured from grade 1.4301 (304) stainless steel - satinpolish finish, material thickness 0.9mm. The apron support is made from 0.9mm material - high polish finish. Supplied complete with battery operated tap and manual soap dispenser. A 3...

D20185N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...

D20186N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....

D20187N

Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...

D20195N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...

D20196N

Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....

D20197N

Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...

D20200N

Manufactured from 1.2mm thick, austenitic grade stainless steel and have a satin polish finish throughout. A thermostatic pre-mixer valve is fitted to provide a constant temperature for the water supply. A paper dispensing housing is located behind the hinged fr...

G20131N

The Centinel washbasin is manufactured from 1.2mm thick grade En 1.4301 (304) stainless steel polished to a satin finish. The bowl is prepared for and supplied with a 32mm flush grated waste onlz (no overflow can be fitted). A single taphole is provided position...

G20476

The washbasin is manufactured from 1.2mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish, with one tap hole, a 32mm flush grated waste is supplied. Bolts and fixing provided. Note: This washbasin is only suitable for duct wall mounting.

G20480 ++

The washbasin is manufactured from 1.2mm thick grade En 1.4301 (304) stainless steel polished to a satin finish without tapholes and supplied with 32mm flush grated waste. Complete with undershield and concealed brackets for screw to wall installation. No screws...

LP21

Single wash basin for floor or wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 380 mm, rectangular shape, 35 mm tap ledge, without overflow, 1 1/4" plug waste, drainage centric, incl. prem...

RNDW220

LOTOS-H single washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless hexagonal bowl without overflow. Integral back panel with holes for fixing. Without tap ledge, outlet with dome was...

RNDW221

LOTOS-R single washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless round bowl. Integral back panel with holes for fixing. Without tap ledge, outlet with dome waste DN 32, mounting ma...

RNDW226

LOTOS-R single washbasin with tap ledge and tap hole 35 mm, made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless round bowl. Integral back panel with holes for fixing. Outlet with dome waste DN...