F1026
Tap, pillar tap, chrome, 0.2 liter per second, DN 10 / 3/8", 310x150x155 mm (WxHxD) READ ALL
Inset sink: B20085R
Catalogue Text
A single bowl/single drainer inset sink manufactured from 0.91mm thick, austenitic stainless steel, satin polish finish. This sink has all four sides incorporating a rimmed edge profile, suitable for insetting into a standard sized worktop. The bowl is prepared for a 38mm waste and overflow and can be supplied with waste, plug, chain and overflow as an extra. Two tapholes are provided directly behind bowl, positioned centrally, suitable for either individual pillar taps or deck pattern mixer tap. Supplied complete with fixing clips.
Single bowl, single drainer
304 material with tapholes and overflow
| Art-No: | B20085R |
Technical data
Inset sink: B20085R
| material: CNS 18/10 material thickness: 1.2 mm surface finish: satin finished overall width: 1015 mm overall height: 200 mm overall depth: 505 mm bowl length: 420 mm bowl width: 350 mm bowl depth: 180 mm bowl finish: satin finished tap ledge: yes waste diameter: DN 32 / 1 1/4" waste hole position: centre back waste hole projection: 198 mm drainer or storage: drainer drainer / storage board length: 500 mm drainer / storage board width: 505 mm drainer / storage board position: right type of mounting: inset mounting |
List of related parts (sorted by type of relation)
accessory
F1083
Tap, pillar tap, chrome, 0.2 liter per second, DN 15 / 1/2", 60x135x75 mm (WxHxD) READ ALL