Wash basins
Single wash basins
ANMW199
LUNA children's washbasin made from MIRANIT resin-bonded mineral material with non-porous smooth surface (max. temperature 80°C). The moulded form is round with a tangential cut and a slightly swept tap landing with storage space including tap hole and small rea...
ANMW510 ++
QUADRO niche washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). For installation in a recess between two walls, with lateral cuts of 90°. With one centrally positioned, seamless rectangular bowl, wit...
ANMW550 ++
RONDA niche washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). For installation in a recess between two walls, with lateral cuts of 90°. With one centrally positioned, seamless round bowl, without ov...
ANMW700
Baby washing-unit consisting of: Washing unit with changing-unit zone, jointlessly integrated upward lip on three sides, washing bowl on the left side, made of resin-bonded mineral material MIRANIT, with pore-free, smooth surface (temperature-resistant up to 80°...
ANMX205
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 0.9 mm, seamless welded round bowl with diameter 277 mm, semicircular shape, 45 mm tap ledge, without overflow, 1 1/4" flat perforated waste, drainage centric, semic...
ANMX206
Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rearright hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking ...
ANMX212
Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rear right hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking...
ANMX216
Knee operated wash hand basin is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. Supplied complete with water spout positioned in rear right hand corner and 32mm waste outlet. Note: The pre-mixing valve and the pipework linking...
ANMX450
Wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded bowl with dimension 360x272x135 mm, made of one piece, for high risk vandalism areas due to seamless closed trap cover and semicircular shape, round...
BR300OU
Round inset basin, can be mounted from top or underneath, stainless steel, surface high polished, material thickness 1 mm, bowl diameter 300 mm, without overflow, incl. 5/4" flat perforated waste, stainless steel lugs for underneath mounting are included.
BRC390SF
Single wash basin for wall mounting, stainless steel, surface on both sides satin finished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high ...
BRP260E
Single wash basin for wall mounting in 90° corners, stainless steel, surface high polished, material thickness 1.25 mm, seamless welded bowl with 260 mm diameter, rounded edges, without overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 192 mm hi...
BRP390
Single wash basin for wall mounting, stainless steel, surface on both sides high polished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high p...
C20120N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
C20124N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
C20131N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C20132N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C20133N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
C20137N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
C20148N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C20149N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C20150N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
C20166N
A range of flat flange bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. Each bowl is prepared for a 38mm waste and overflow. Waste, plug, chain and overflow are availables extras. No tapholes are provided therefore any...
C20174N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C20175N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...C50120
Insert sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) stainless steel, satin polish finishe. The top flange surround has a rimmed edge and the bowl is supplied complete with fixing clips for mounting into a worktop. The bowl is prepared for a...C50148N
Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) stainless steel, satin polish finish. The top flange surround has a rimmed edge and the bowl is supplied complete with fixing clips for mounting into a worktop. All bowls are prepared for a...C50149N
Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) stainless steel, satin polish finish. The top flange surround has a rimmed edge and the bowl is supplied complete with fixing clips for mounting into a worktop. All bowls are prepared for a...C50150N
Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) stainless steel, satin polish finish. The top flange surround has a rimmed edge and the bowl is supplied complete with fixing clips for mounting into a worktop. All bowls are prepared for a...C50174N
Inset sink bowl manufactured from either 1.2mm thick, grade 1.4404 (316) stainless steel, satin polish finish. The top flange surround has a rimmed edge and the bowl is supplied complete with fixing clips for mounting into a worktop. The bowl is prepared for a 3...C50175N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17mm rimmed edge whereas all the other sink b...
D20140N
This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 38mm waste outlet. Waste fitt...D20141N
This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 38mm waste outlet. Waste fitt...D20142N
This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 38mm waste outlet. Waste fitt...
D20144N
This range of round inset sink bowls is manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel, satin polish finish. All the bowls incorporate a rimmed edge for insetting into a worktop. All three bowls are prepared for a 38mm waste outlet. Waste fitt...
D20161N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...
D20162N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....
D20163N
Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...
D20167N
Washbasin for insetting into worktop, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 0.9mm. Prepared for 32mm waste outlet and overflow hole with two tapholes in the rear ledge behind the bowl - suitable for eiher ...
D20168N
Washbasin for insetting into worktop, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 0.9mm. Prepared for 32mm waste outlet and overflow hole with two tapholes in the rear ledge behind the bowl - suitable for eiher ...
D20170N
Washbasin for insetting into worktops, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 1.2mm. Prepared for 32mm waste outlet and verflow hole with two tapholes in the rear ledge behind the bowl - suitable for basin ...
D20171N
Washbasin for insetting into worktops, manufactured from grade 1.4301 (304) stainless steel - satin polish finish, material thickness 1.2mm. Prepared for 32mm waste outlet and verflow hole with two tapholes in the rear ledge behind the bowl - suitable for basin ...
D20181N
Handwashpac top is manufactured from stainless steel - satin polish finish, material thickness 0.9mm. The apron support is made from 0.9mm material - high polish finish. Supplied complete with spout and knee operated valve which requires a pre-mixed water supplz...
D20184N
Handwashpac top is manufactured from grade 1.4301 (304) stainless steel - satinpolish finish, material thickness 0.9mm. The apron support is made from 0.9mm material - high polish finish. Supplied complete with battery operated tap and manual soap dispenser. A 3...D20185N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...D20186N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....D20187N
Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...D20195N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet and is supplied with two tapholes in the rear ledge. No...D20196N
Washbasin top manufactured from 0.9mm thick, grade 1.4301 (304) stainless steel - high polish finish. The apron support is made from 0.9mm (430) material - high polish finish. Prepared for 32mm waste outlet overflow. Supplied with two tapholes in the rear ledge....D20197N
Washbasin top manufactured from 0.9mm thick grade 1.4301 (304) stainless steel - satin polish finish. Prepared for 32mm waste outlet and overflow. Supplied with two tapholes in the rear ledge. Wall mounting bz using the fixing holes provided in both the rear ups...
D20200N
Manufactured from 1.2mm thick, austenitic grade stainless steel and havea satin polish finish throughout. A thermostatic pre-mixer valve is fitted to provide a constant temperature for the water supply. A paper dispensing housing is located behind the hinged fro...
G20131N
The Centinel washbasin is manufactured from 1.2mm thick grade En 1.4301 (304) stainless steel polished to a satin finish. The bowl is prepared for and supplied with a 32mm flush grated waste onlz (no overflow can be fitted). A single taphole is provided position...
HDTX450
The washbasin is manufactured from 1.2 mm thick grade EN 1.4301 (304) stainless steel polished to a satin finish, with one tap hole, a 32mm flush grated waste is supplied. Bolts and fixing provided. Note: This washbasin is only suitable for duct wall mounting. L...
HDTX455
Wash basin for disabled for wall mounting, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded round bowl with diameter 347 mm, witho...
LP21
Single wash basin for floor or wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 380 mm, rectangular shape, 35 mm tap ledge, without overflow, 1 1/4" plug waste, drainage centric, incl. prem...
RNDW220
LOTOS-H single washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless hexagonal bowl without overflow. Integral back panel with holes for fixing. Without tap ledge, outlet with dome was...
RNDW221
LOTOS-R single washbasin made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless round bowl. Integral back panel with holes for fixing. Without tap ledge, outlet with dome waste DN 32, mounting ma...
RNDW226
LOTOS-R single washbasin with tap ledge and tap hole 35 mm, made of MIRANIT resin-bonded mineral with smooth, pore-free surface (temperature-resistant up to 80°C). With one seamless round bowl. Integral back panel with holes for fixing. Outlet with dome waste DN...
RNDX360SR
Round semi recessed vanity basin. Material thickness 1.2 mm, CNS 18/10 stainless steel. Semi-recessed bowl has raised ledge. Installation hardware included. Satin finished rim, satin finished bowl. Undercoated to reduce condensation and resonance. Accepts DN 32 ...
SIRX910++
Single bowl commercial sink made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal to crea...
SIRX910L++
Single bowl commercial sink made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal to crea...
SIRX915++
Single bowl commercial sink made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal to crea...
SIRX930 ++
Wall hung basin made from 1.2 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Exposed surfaces are satin finished. Wall bracket and 30 mm waste assembly with rubber stopper included. Waste location back.
SIRX940 ++
Single bowl commercial sink made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal to crea...
SIRX951 ++
Single bowl commercial sink with drain board made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied...
SIRX952 ++
Single bowl commercial sink with drain board made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied...
SIRX980 ++
Single bowl commercial sink made from 1.2 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal to crea...
SIRX990
Single bowl commercial laboratory sink made from 0.9 mm thick corrosion resistant type 316 EN 1.4401 17/12/2 stainless steel. Self rimming edge. Exposed surfaces are satin finished. Installation kit and 40 mm waste assembly included. Waste location centre..
WB240WM
Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 240 mm, semicircular shape, 45 mm tap ledge, without overflow, 1 1/2" flat perforated waste, drainage centric, incl. s...
WT500CS
Made of stainless steel, 1mm thickness, drain 1¼", with rear tap ledge, with overflow, including fixing set. 2 tapholes at 180mm centres.
XINH203
Single wash basin "Aquina S" for wall mounting, stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 2 mm, bowl high polished, seamless ...
XINH204
Single wash basin "Aquina L" for wall mounting, stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 2 mm, bowl high polished, seamless ...
