Wash basins

Single wash basins
  • ANMW198

    GAMBA children's washbasin made from MIRANIT resin-bonded mineral material with non-porous smooth surfaces (max. temperature 80°C). The moulded form is round with an asymmetric tap landing with storage space including tap hole and rear upstand. Without overflow....
  • ANMW199

    LUNA children's washbasin made from MIRANIT resin-bonded mineral material with non-porous smooth surface (max. temperature 80°C). The moulded form is round with a tangential cut and a slightly swept tap landing with storage space including tap hole and small rea...
  • ANMW210 ++

    RONDA single washbasin made of MIRANIT resin-bonded mineral material with smooth, pore-free surface (temperature-resistant up to 80°C). With seamless round bowl, flattened out at the rear, without overflow. Integral back panel with integrated brackets and holes ...
  • ANMW410 ++

    QUADRO single washbasin made of MIRANIT resin-bonded mineral material, with smooth, pore-free surface (temperature-resistant up to 80°C). With seamless, rectangular bowl without overflow. Integral back panel with integrated brackets and holes for fixing. Rear co...
  • ANMW416

    QUADRO single washbasin made of MIRANIT resin-bonded mineral material, with smooth, pore-free surface (temperature-resistant up to 80°C). With seamless, rectangular bowl without overflow. Integral back panel with integrated brackets and holes for fixing. Rear co...
  • ANMX205

    The Centinel washbasin is manufactured from 1.2mm thick grade En 1.4301 (304) stainless steel polished to a satin finish. The bowl is prepared with no tap hole and supplied with a 32mm flush grated waste only (no overflow can be fitted). Complete with bottom acc...
  • ANMX450

    Wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded bowl with dimension 360x272x135 mm, made of one piece, for high risk vandalism areas due to seamless closed trap cover and semicircular shape, round...
  • ANMX500 ++

    Wash basin for disabled for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded round bowl with diameter 350 mm, rectangular shape, 75 mm tap ledge, without overflow, seamless welded waste with 32 mm drain pipe, dra...
  • BR300OU++

    Round inset basin, can be mounted from top or underneath, stainless steel, surface high polished, material thickness 1 mm, bowl diameter 300 mm, without overflow, incl. 5/4" flat perforated waste, stainless steel lugs for underneath mounting are included.
  • BRC390SF

    Single wash basin for wall mounting, stainless steel, surface on both sides satin finished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high ...
  • BRP260E

    Single wash basin for wall mounting in 90° corners, stainless steel, surface high polished, material thickness 1.25 mm, seamless welded bowl with 260 mm diameter, rounded edges, without overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 192 mm hi...
  • BRP390

    Single wash basin for wall mounting, stainless steel, surface on both sides high polished, material thickness 1.25 mm, seamless welded bowl with 385 mm diameter, rounded edges, with overflow, with 120 mm tap ledge and incl. 35 mm tap hole drilling, 170 mm high p...
  • BS204 ++

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 500x335x155 mm, oval shape, 90 mm tap ledge, prewelded mounting brackets, with soap dish, incl. screws and dowels.
  • HDTX450

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, with 3 threaded rods for mounting through the wall via a service room, seamless welded bowl, 40 mm tap ledge, without taphole, without overflow, 1 1/4" flat ...
  • HDTX455

    Wash basin for disabled for wall mounting, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, stainless steel, surface satin finished, material thickness 1.2 mm, seamless welded round bowl with diameter 347 mm, witho...
  • LP21

    Single wash basin for floor or wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 380 mm, rectangular shape, 35 mm tap ledge, without overflow, 1 1/4" plug waste, drainage centric, incl. prem...
  • RNDH200 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 200 mm, without overflow, incl. 5/4" flat perforated and plug waste, stainless steel lugs for underneath mounting are included. Outcut diamet...
  • RNDH260 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 260 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included. Outcut diameter for ...
  • RNDH300 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 300 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included. Outcut diameter for ...
  • RNDH360 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 357 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included. Outcut diameter for ...
  • RNDH381 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 380 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included. Outcut diameter for ...
  • RNDH420 ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 418 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included. Outcut diameter for ...
  • RNDH450-O ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 450x330 mm, with overflow, incl. 5/4" overflow kit without waste, stainless steel lugs for underneath mounting are included.
  • RNDH451-O ++

    Round inset vanity basin, can be mounted from top or underneath, stainless steel, material thickness 1 mm, bowl diameter 450x330 mm, with overflow and tap ledge, incl. 35 mm tap hole drilling, incl. 5/4" overflow kit without waste, stainless steel lugs for under...
  • RNDX360SR

    Round semi recessed vanity basin. Material thickness 1.2 mm, CNS 18/10 stainless steel. Semi-recessed bowl has raised ledge. Installation hardware included. Satin finished rim, satin finished bowl. Undercoated to reduce condensation and resonance. Accepts DN 32 ...
  • WB240WM

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded round bowl with diameter 240 mm, semicircular shape, 45 mm tap ledge, without overflow, 1 1/2" flat perforated waste, drainage centric, incl. s...
  • WT310E

    Single wash basin for wall-corner mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 290x155x100 mm, rectangular shape, with tap ledge, without overflow, 1 1/4" flat perforated waste, drainage centric, ...
  • WT360C

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 290x155x121 mm, rectangular shape, tap ledge, without overflow, 1 1/4" waste, drainage centric, front panel with 45° corner ...
  • WT400A

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 340x300x140 mm, rectangular shape, 80 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, prewelded mo...
  • WT400C

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 340x300x140 mm, rectangular shape, 120 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, front panel...
  • WT450

    Single wash basin, stainless steel, material thickness 0.9 mm, surface satin finished, circular bowl with diameter 380 mm, rear upstand, single tap hole, 32 mm waste/overflow fitting, Incl. screws and dowels.
  • WT500A

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 500x400x200 mm, rectangular shape, 70 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, prewelded mo...
  • WT500C

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 400x300x135 mm, rectangular shape, 105 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, front panel...
  • WT600A

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 550x350x140 mm, rectangular shape, 75 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, prewelded mo...
  • WT600C

    Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm, seamless welded bowl with diameter 550x350x145 mm, rectangular shape, 90 mm tap ledge, with overflow, 1 1/4" plug waste, drainage rewards centric, front panel ...
  • ANMW500 ++

    Single washbasin VARIUScare made of MIRANIT resin-bonded mineral material, with pore-free, smooth surface (temperature-resistant up to 80°C). Colour Alpine white. Wheelchair accessible and ergonomic designed based on the two-senses principle (tactile and visual)...
  • ANMW501 ++

    Single washbasin VARIUScare made of MIRANIT resin-bonded mineral material, with pore-free, smooth surface (temperature-resistant up to 80°C). Colour Alpine white. Wheelchair accessible and ergonomic designed, with integrated gripping edge. Seamless moulded bowl,...
  • ANMW0001 ++

    Single washbasin, wheelchair accessible, made of MIRANIT resin-bonded mineral material with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with integrated grab rails, storage surfaces and integral back panel with integrated b...
  • ANMW0003 ++

    Hand washbasin, wheelchair accessible, made of MIRANIT resin-bonded mineral material with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with integrated grab rails, storage surfaces and integral back panel with integrated bra...
  • ANMW0010 ++

    Single washbasin made of MIRANIT resin-bonded mineral material with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting. It has a seamless mo...
  • ANMW0012

    VARIUSmed multiple washbasin made of MIRANIT resin-bonded mineral material, with a non-porous smooth surface (temperature resistant up to 80°C) coated all around. Alpine white colour. With up to 3 seamlessly integrated bowls, without overflow. Variable bowl dist...
  • ANMW0014

    Multiple washbasin made of MIRANIT resin-bonded mineral material, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting. The unit has up t...
  • ANMW0015

    Washbasin solution, wheelchair accessible, made of MIRANIT resin-bonded mineral material, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with integrated grab rails, storage surfaces and integral back panel with integrate...